Atlantis Land A02-PCI-W54 Especificaciones

10 D:\ will depends on where the CD-ROM drive is located and <Windows OS> will depend on the Windows OS you are using. 2. Click on “A02-PC

11 Good Waiting connection Not connected When the icon in the toolbar represents in full green color then the signal strength has an excellent

12 5. Wireless Utility (For Windows VISTA) 5.1 Link Info This is the default screen after launching the Utility program. Status: Shows the associ

13 connection between the Wireless LAN USB 2.0 Adapter with the Access Point. TX/RX: Shows the statistics of data transfer, and the calculation is

14 SSID: Service Set Identifier, which is a unique name shared among all client in a wireless network. The SSID must be identical for client in the

15 3. Select “ASCII” of “HEX” from Key Format to choose keys introducing method. 4. Type 4 keys (64 or 128 bits) to use to encrypt your data with

16 Passphrase , as SSID, must be the same for all devices of the network. If you need to use a RADIUS authentication, please choose “WPA” or “WPA

17 Select any one of the wireless networks by double-clicking on it or clicking on the “Connect” button. Click on “Refresh” to update available

18 Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing Access Points or Wirel

19 6. Wireless Uility (for Windows 98SE, 2000 ed XP) 6.1 Link Information This is the default screen after launching the Utility program. Status

ITALIANO Questo prodotto è coperto da garanzia Atlantis Land

20 Link Quality: Shows the link quality of the wireless LAN adapter with the Access Point when operating under Infrastructure mode. Signal Strength

21 Wireless Mode: There are two types available for selection: • Infrastructure: to establish wireless communication with LAN and other wireless cl

22 supported only from the IEEE 802.11b (High- Rate) standard and not from the original IEEE 802.11. That means that stations using Short-Preamble c

23 6.3 Advanced This screen is where you configure the Security settings for the Wireless Adapter. Auth Mode: The following options are available

24 OPEN SYSTEM / SHARED KEY 1. Select “Open System” or “Shared System” from Authentication field. 2. Select “WEP” from Encryption field. (Wired-

25 WPA /WPA-PSK / WPA2 / WPA2-PSK 1. Select “WPA-PSK” or “WPA2-PSK” form Authentication field. 2. Select “AES” or “TKIP” from Encryption field (

26 6.4 Site Survey This screen displays the wireless networks (wireless clients and Access Points) that are within range and it also allows the user

27 6.5 About This screen displays information about the Wireless Adapter, such as the Driver and Utility version. When a new version of the utility

28 7. Support For technical informations, please connect to http://www.atlantis-land.com/ita/supporto.php for use on-line ticket platform or call +3

29 8. APPENDIX A: Technical Specifications GeneralRadio Technology IEEE 802.11b Direct Sequence Spread Spectrum (DSSS) IEEE 802.11g Orthogonal Frequ

3 ENGLISH 1. Introduction ... 8 2. Unpacking an

30

Via Pelizza da Volpedo, 59 Cinisello Balsamo – MI – Italy info@atlan

4 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, wheth

5 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, wheth

6 CE Mark Warning In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate meas

7 Outdoor 2400-24542454-2483,5 100mW(20dBm)10mW(10dBm) Italy(IT): For more info, consult the website www.comunicazioni.it Luxembourg: General autho

8 Congratulations on your purchase of this 802.11g Wireless PCI Adapter. This manual helps to get familiar with the Adapter. This manual contains de

9 • Visually inspect the PCI Adapter and make sure that it is fully plugged in to the PCI slot. • Make sure that there is a well environment that