Atlantis Land A02-AP2-W54M Guía de usuario descargar pdf (Pagina 23)

Wireless MIMO Multi-Function Access Point

A02-AP2-W54M Pag. 17

3.2 Default Setting

Before configuring the Wireless MIMO Multi-Function AP through WLAN, make

sure that the SSID, Channel and the WEP was set properly.

 Username: admin

 Password: atlantis

 IP Address(192.168.1.254)

 Subnet Mask(255.255.255.0)

 Mode: Access Point

 SSID: A02-AP2-W54M

 Channel: 6

3.2.1 Password

When there is a screen needs to enter the Network password, it means that there

is a password settle, type in the password you entered before.

If you lose password, press reset button for 15 (or more) seconds to

restore default setting to Wireless MIMO Multi-Function AP.

Press reset button until Wireless MIMO Multi-Function AP will reboot

(LED STATUS turn off); when STATUS blinking, release reset button.

Now, Wireless MIMO Multi-Function AP is restoring to factory setting.

3.2.2 LAN and WLAN Ports

The parameters of LAN and WLAN ports are pre-set in the factory. The default

values are shown below.

Porta LAN Porta WLAN

IP address

192.168.1.254

Subnet Mask

255.255.255.0

Mode=Access Point

Channel=6

SSID= A02-AP2-W54M

Security=Disabled

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 64 65

Sin comentarios

Atlantis Land A02-AP2-W54M Guía de usuario Pagina 23